Author [expand]

[Modern View]

Jim 09-25-2004 16:08:18 69.179.46.146 11306 Report to Moderator

DB, I did not test the battery selector switch but I did put an ohm meter on the main dash power switch. With the battery selector switch off, I put one lead on the "hot" side of the dash switch (in the off position) and the other lead on the "switch" side. I had the same readings when I turned the switch to "On". There should only be resistance when the switch is "off" and no or little resistance when the switch is on, right? I am thinking that this dash switch is where my problem is. [Reply]  [No Email]