Author [expand]	[Modern View]
doug 07-08-2005 10:53:16 130.76.96.17 14917 Report to Moderator	Do you guys have any combinations of intake manifolds, heads, and cams that worked really well for you? Wanting to increase bottom and mid-range torque as much as possible, along with improved efficiency to help on mileage. [Reply]  [No Email]
the tractor vet 07-08-2005 17:10:50 4.124.72.241 14921 Report to Moderator	A set of 92 cc heads a low riser manifold and a cam of around 234 duration. and a good holley 4 bbl. with metering blocks not plates and around 700-750 cfm with vac. secendarys and do some jet playen and power valve playen to get it wright and a total of no more then 34-36 degrees total advance at 2000 and a set of pistons with no more the a 9 to 1 comp. ratio. And dual exhust with 2-2 1/2 inch pipes.   [Reply]  [No Email]