Author [expand]	[Modern View]
David I. 10-15-2005 11:43:11 67.142.130.20 16549 Report to Moderator	Intermittent starter problem. I have replaced the starter, the solenoid twice, the wire from ignition switch to solenoid, ignition switch... Turn switch and... starts the motor or clicks or nothing or spins without engaging... next turn may repeat or change... ambient or motor temperature makes no difference battery is good and charged battery cable to starter is good starter and motor well grounded battery terminals are clean when it works the starter turns normally and the engine starts immediately I am losing my mind! [Reply]  [Send Email]
john in nebraska 10-15-2005 13:15:35 209.74.225.162 16553 Report to Moderator	double check all the connections on your new wire from the ignition switch to solenoid, and do the same with the cable connections on the starter solenoid. Just a click, indicates a solenoid problem/low voltage/or loose connection. spinning without engaging, internal starter problem, or bendix problem. most of it seems to point right at the starter, or the starter electrical connections, and is where I'd investigate further at this point. for instance pull a known good starter off another vehicle?   [Reply]  [No Email]