Author [expand]	[Modern View]
Darrell Sholar 01-30-2006 05:34:43 63.149.178.130 18260 Report to Moderator	Need to change starting system and battery from 6 volt to 12 volt - what needs to be done? or where can I go to get the information...any help would be greatly appreciated. [Reply]  [Send Email]
Bob 01-30-2006 07:43:33 64.21.249.40 18261 Report to Moderator	1.) Starter will work without changes. 2.) Change all light bulbs and heater motor. 3.) Wipers are vacuum, right? 4.) Change coil to a 12-Volt unit (with ballast resistor, if needed). 5.) Find the power supply wire to the fuel gage, and power it through a voltage reducer. (I used a 6-Volt integrated circuit regulator, mounted on a scrap of aluminum, for a heat sink.) 6.) Connect up a 12-Volt alternator. The site linked below has a lot of info on that: Electrical   [Reply]  [No Email]