Home |Gallery |Forum |Ads Sponsored by Yesterday's Tractors 
The Classic Truck Resource Page
Vintage Truck Headquarters

 
Featured Photo

Marketplace
Classified Ads
Photo Ads

Community
Discussion Forum
Forum Archives

Galleries
Misc Truck Photos
Ford Truck Photos
Picture List

Research & Info
Model Profiles
Ford F-Series
Article Archives
Truck Links

Miscellaneous
Contact Us

Related Sites
Antique Tractors
Kountry Life
Tractor Parts

[Home]
Discussion Forum

Topic: 1938 D2 International Harvester PU
[Return to Forum]

Author [expand] [Modern View]
Super55

09-16-2006 11:49:43
70.69.127.45
21499



Report to Moderator


Need some advice to see if a good skillet whomping is worth it. I
am just a shade tree mechanic that likes old machines. I just like
their character and looks. I have always wanted an old pick up to
take to shows. I found one that I can purchase for $3,500. Runs as
is and is 100% stock. I would appreciate and encouragement or
warnings!. I'd just hate to have this one slip away.... it's only about
100 miles from home.

[Reply]  [Send Email]
Hal/WA

09-16-2006 18:45:15
66.45.175.118
21501



Report to Moderator

Re: 1938 D2 International Harvester PU in reply to Super55, 09-16-2006 11:49:43  
We had one very similar to that in the 50's and early 60's, and it was the first vehicle I got to drive, other than the little Farmall Cub we had. I was a little guy, but by sitting on the very front edge of the seat, I could operate the pedals. One time my Dad wanted me to drive it slowly forward while he forked manure out the back. It worked pretty well for awhile, but then my foot slipped off the clutch pedal, which dumped my Dad, his pitchfork and a bunch of manure in a big pile on the ground. He was a little mad, and thought I did it on purpose, but finally believed me. Not too bad driving for an 8 year old!

The truck in the photo looks pretty straight--quite a bit nicer than our old Cornbinder looked 50 years ago. I would ask if the brakes are working OK, since that was one of our problem spots, and if the engine is rebuilt. Our old pickup had the nickname "smoky", as it really needed engine work. I always thought it would have been fun to have put a later V8, probably a small block Chevy in it, but unfortunately a guy came along and wanted to buy it. My Dad sold it in about 1964 for $50, the same price he had paid for it years before. I don't know if it would be worth $3500 to me, but if it is all there and all working, it doesn't look like it would be too hard to fix up the cosmetics and have a really enjoyable old pickup that you are unlikely to see a twin of driving down the road. Good luck, and have fun. Thanks for bring back a couple of neat memories for me!

  [Reply]  [No Email]
Super 55

09-17-2006 00:10:33
70.69.127.45
21505



Report to Moderator

Re: Re: 1938 D2 International Harvester PU in reply to Hal/WA, 09-16-2006 18:45:15  
That truck is in Washington, in Bremerton. It looks like you have a
Washington handle on your name there. The truck is actually in
good shape mechanically. And the body has no rust other than the
odd patina......

  [Reply]  [Send Email]

[Options]  [Printer Friendly]  [Return to Forum]   [Add a Reply]

Hop to:

[Home]

Copyright © 2002-2008 Yesterday's Tractor Co.
Antique Truck Headquarters
www.YesterdaysTruck.com
Privacy Statement | Terms and Conditions of Use