Author [expand]	[Modern View]
Dumpster Maniac 07-19-2009 14:14:04 69.30.186.6 32359 Report to Moderator	Can anyone come up with a diagram/pic of the rear brake assembly for an F 600 Ford? It has an Eaton rear end (2 speed) Hydraulic/power assist, with a 15" drum -- stamped on the inside of housing/backing plate. When I pulled the drum, the guts had all cratered so going back/P.N.'s are a little difficult to figure out. The other side is the same way, really the two springs are the main problem, if I can find a P.N. or pic with and identifing diagram number I might be able to go from there. THANKS FOR ANY HELP!! [Reply]  [Send Email]
bronco 07-20-2009 17:29:42 67.127.54.124 32368 Report to Moderator	I have a 1977 Ford truck shop manual and if you can give me a little more info on what kind of brake setup it has I can scan the pictures and post them for you. Are they dual or single piston? My book shows either Wagner or Kelsey-Hayes brakes for the F500 - 900. There probably isn't much difference between the '77 and '78 models.... John   [Reply]  [No Email]