Home |Gallery |Forum |Ads Sponsored by Yesterday's Tractors 
The Classic Truck Resource Page
Vintage Truck Headquarters

 
Featured Photo

Marketplace
Classified Ads
Photo Ads

Community
Discussion Forum
Forum Archives

Galleries
Misc Truck Photos
Ford Truck Photos
Picture List

Research & Info
Model Profiles
Ford F-Series
Article Archives
Truck Links

Miscellaneous
Contact Us

Related Sites
Antique Tractors
Kountry Life
Tractor Parts

[Home]
Classic Truck Discussion Board

Topic: Re: 1957 s120 4x4
[Show Entire Topic] [Return to Forum]

Author [expand] [Modern View]
yankton

08-27-2009 10:03:23
216.151.14.166
32616



Report to Moderator


Thanks for the info Buzzman. I went out and looked at the build sheet this am. It does call out a 'deluxe oil filter'. The filter that came out of it
had a cloth surround and a little folding handle that you lifted it up with. No numbers though. What do the sd,bg,bd letters indicate?

[Reply]  [No Email]
Buzzman72

08-27-2009 14:00:42
74.129.194.33
32620



Report to Moderator

Re: 1957 s120 4x4 in reply to yankton, 08-27-2009 10:03:23  
The SD is the Silver Diamond series of engines, and included the SD-220 and SD-240. The BD is the Black Diamond engine series, and included the BD-220, BD-240, and the BD-264. The BG is a revised series of the BD engines, [some say it was for "Blue-Gray," but I'm not sure about that] and they are identical to the BD engines excep for the PCV valve system rather than still venting blow-by to the atmosphere via the road draft tube on the valve cover on the side of the block.

IH used two suppliers for their oil filters, DeLuxe and Michiana. The Michiana seems to have a "lift ring" on the element itself, while the DeLuxe is what we always called a "sock" filter, and the bail on the little basket--IH called it a "sump" in the parts book--that holds the filter is what's used to lift the filter element out of the housing.

But my parts books only go through the L-series trucks.

  [Reply]  [Send Email]
yankton

08-27-2009 22:20:49
216.151.14.166
32628



Report to Moderator

Re: 1957 s120 4x4 in reply to Buzzman72, 08-27-2009 14:00:42  
thanks all for the info. I did visit with my Napa parts guy today and we did get out the old parts books and look at measuremts. FYI the fram filter (333) crosses to the 1156 Napa filter which is too wide (4.53"). My deluxe (sock filter) is only about 4.25" wide and sits on top of a sumpcup that catches sludge. We settled on a Napa 1006 and tomorrow I'll see if it fits. Looking also for a book that details out the difference in 1950's IH trucks if there is such an animal out there. Thx again!

  [Reply]  [No Email]

[Show Entire Topic]   [Options]  [Printer Friendly]  [Return to Forum]   [Add a Reply]

Hop to:

[Home]

Copyright © 2002-2008 Yesterday's Tractor Co.
Antique Truck Headquarters
www.YesterdaysTruck.com
Privacy Statement | Terms and Conditions of Use