Home |Gallery |Forum |Ads Sponsored by Yesterday's Tractors 
The Classic Truck Resource Page
Vintage Truck Headquarters

 
Featured Photo

Marketplace
Classified Ads
Photo Ads

Community
Discussion Forum
Forum Archives

Galleries
Misc Truck Photos
Ford Truck Photos
Picture List

Research & Info
Model Profiles
Ford F-Series
Article Archives
Truck Links

Miscellaneous
Contact Us

Related Sites
Antique Tractors
Kountry Life
Tractor Parts

[Home]
Discussion Forum

Topic: Re: Shifting question ih loadstar 1600
[Show Entire Topic] [Return to Forum]

Author [expand] [Modern View]
Finagler

10-01-2009 01:14:45
76.126.86.46
32857



Report to Moderator


Loosened the clutch linkage to let out some free play. Was a little tight so figured it wasn't releasing enough to engage the clutch. Just spun the threaded bolt out a little at the trans but can't go much further. Wasn't the handbrake, though, but that needs to be tightened also, or maybe resurfaced. Clutch engages at very top of release stroke, but it finally goes like gangbusters.

Fuel lines and hoses look pretty bad though, with a leak coming from top of passenger side fuel tank. Hoses pull form bottom of tank so I'm suspecting some junk in there. Looking into taking it off and repairing, as well as replacing all hoses. Still can't seem to get the back-up lights to work, prob switch on trans or somewhere isn't sending a signal, same with the fuel gauge. Someone sure mixed up a lot of wires in the fuse box. Going through them one by one.

[Reply]  [No Email]

[Show Entire Topic]   [Options]  [Printer Friendly]  [Return to Forum]   [Add a Reply]

Hop to:

[Home]

Copyright © 2002-2008 Yesterday's Tractor Co.
Antique Truck Headquarters
www.YesterdaysTruck.com
Privacy Statement | Terms and Conditions of Use