Author [expand]

[Modern View]

michael a. lee 10-18-2009 08:11:15 64.33.255.26 32988 Report to Moderator

with all problems you must start at the beginning. make sure all the linkage to the clutch is in good condition. you are only moving the fingers 1/4 inch, might not be enough. a worn pin and clevis or worn bushings can reduce travel. if it utilizes a cable it could be stetched. it is not a 671 detroit clutch. it is either a single disk push type clutch, a double disk pull type clutch. with the double disk which i doubt it is you also have drive lugs that need to be aligned. generally new pressure plates do not need the fingers adjusted. [Reply]  [Send Email]