Home | Gallery | Forum | Ads YESTERDAYSTRUCK.COM 
The Classic Truck Resource Page
Vintage Truck Headquarters

 
Featured Photo


Marketplace
Classified Ads
Photo Ads

Community
Discussion Forum
Forum Archives

Galleries
Misc Truck Photos
Ford Truck Photos
Picture List

Research & Info
Model Profiles
Ford F-Series
Truck Links

Miscellaneous
Contact Us

Related Sites
Antique Tractors
Kountry Life
Tractor Parts
Tractor Manuals

[Home]
Classic Truck Discussion Forum

1964 International loadstar

Welcome [Log out]
Author  [Modern View]
Shawn Jones

09-21-2014 19:01:52




Report to Moderator

I am plan on restoring a 1964 loadstar this winter that was purchased new by my grandpa. It only has 40,000 miles but it will need a few things. Where is a good place to purchase parts? I will need a driver's side window, seals, etc. Also I would like to add power steering, how hard will that be




[Reply]   [No Email]
Paul in MN

10-16-2014 18:16:55




Report to Moderator
 Re: 1964 International loadstar in reply to Shawn Jones, 09-21-2014 19:01:52  
NAPA still has many parts available for that truck. My son has one with a grain box in good usable condition. The window glass can be made by any good glass shop if you have the old one for a pattern. But the doors and glass are the same on the travelalls and the pickups of that same vintage (1963 - 1968).

IH trucks (Navistar) does not have anything of that vintage unless you find a small town IH truck dealer who has been stocking this stuff for 50+ years.

The brakes may be your tough problem. The hydrovac units below the driver's seat under the cab were notorious for crapping out. But they are rebuildable. The brakes have 2 single piston hydraulic cylinders, one at the top of the wheel and one at the bottom. They are tied together with a well bent steel tube. That tube may be hard to find, and is not likely to be DIYed without kinking.

If it has the V8 engine 304 or 345, the engine timing is done from the #8 cylinder. The cylinder #s are cast into the intake manifold.

Good luck with your project!!

Paul in MN

[Reply]  [No Email]
Buzzman72

09-22-2014 18:48:11




Report to Moderator
 Re: 1964 International loadstar in reply to Shawn Jones, 09-21-2014 19:01:52  
The door glass is simply flat safety glass, and any auto glass shop can cut that. For seals/weatherstrips, Google search for an outfit called Class-Tech Cars.

A good source of tech info would be the OldIHC discussion boards, linked below. They have a specific discussion board just for Loadstars.

[Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Add a Reply]

Hop to:


[Home]

Copyright © 2002-2013 YesterdaysTruck.com
Antique Truck Headquarters