Home | Gallery | Forum | Ads YESTERDAYSTRUCK.COM 
The Classic Truck Resource Page
Vintage Truck Headquarters

Featured Photo

Classified Ads
Photo Ads

Discussion Forum
Forum Archives

Misc Truck Photos
Ford Truck Photos
Picture List

Research & Info
Model Profiles
Ford F-Series
Truck Links

Contact Us

Related Sites
Antique Tractors
Kountry Life
Tractor Parts
Tractor Manuals

Classic Truck Discussion Forum

Re: truck wheels

[Show Entire Topic]  

Welcome [Log out]
Author  [Modern View]

09-30-2014 06:43:11

Report to Moderator

wolf, it depends on what year the ford wheel is for starters, its stamped on the rim, the bolt pattern is the same diameter if the wheel is from the 70's or 80's, but some of the dodges then, had wheels with alternating 'dimples' on the holes to secure the lug nuts, if the ford has a flat lug nut face it wont run in a dual set with a dimpled wheel but could be used on the front as a single

[Reply]   [No Email]

09-30-2014 06:46:40

Report to Moderator
 Re: truck wheels in reply to ericlb, 09-30-2014 06:43:11  
should add if you use a flat faced wheel on the front of a dodge running with dimpled wheels you also need to change the lug nuts for the conical ones as opposed to the ones with a washer on them for the dimpled wheels, otherwise there will be nothing to center the flat faced wheel on the hub

[Reply]  [No Email]
[Show Entire Topic]     [Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Add a Reply]

Hop to:


Copyright © 2002-2013 YesterdaysTruck.com
Antique Truck Headquarters