Home | Gallery | Forum | Ads YESTERDAYSTRUCK.COM 
The Classic Truck Resource Page
Vintage Truck Headquarters

Featured Photo

Classified Ads
Photo Ads

Discussion Forum
Forum Archives

Misc Truck Photos
Ford Truck Photos
Picture List

Research & Info
Model Profiles
Ford F-Series
Truck Links

Contact Us

Related Sites
Antique Tractors
Kountry Life
Tractor Parts
Tractor Manuals

Classic Trucks

Re: Convert 6 to 12 volt electrial system

[Show Entire Topic]  

Welcome [Log out]
Author  [Modern View]

09-08-2015 06:54:24

Report to Moderator

You can leave the starter 6v unless you can find a 12v easily.

Change all bulbs.
Wiper motors, heater motor if applicable.

(resistors don't work well with these)

Add a resistor to the fuel gauge power.

Switch the wires on the Amp Gauge,

Switch the wires on the Ign. Coil and add a Ballast Resistor

Change to 12v Gen. and Regulator or use a 12v Alt.

Change to 12v Battery and reverse the cables.


[Reply]   [No Email]
[Show Entire Topic]     [Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Add a Reply]

Hop to:


Copyright © 2002-2013 YesterdaysTruck.com
Antique Truck Headquarters