Re: engine swap 302 to 400m

[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]

Posted by Jon H on July 03, 2004 at 14:11:48 from (69.26.16.148):

In Reply to: engine swap 302 to 400m posted by jon on July 03, 2004 at 12:44:07:

I can't be much help with the motor mounts,but unless you are using the transmission/bellhousing that came with the 400 engine,you will have another problem. The 302-351 Windsor and 351 Cleveland all use the 6 bolt "small block" bellhousing pattern.
The 351M "modified" is just a 400 modified by reducing the stroke by 1/2 inch for 351 CI,so the 351M and 400 share the same block,which has the same bellhousing pattern as the 429-460 engines. The 351 M and 400 has almost no parts that interchange with either the 302-351w-351c or the 429-460. I believe,heads,distributor and exhaust manifolds fit from a 351m-400 to a 351C 2bbl engine only.

Follow Ups:

Re: Re: engine swap 302 to 400m Bundy 06:33:00 07/04/04 (0)

Post a Followup

Name:
E-Mail: Hide: Yes No
Hiding your address protects you from spam generators but allows you to receive email response notifications.
Subject: Re: Re: engine swap 302 to 400m
Comments:

Optional Link URL:
Link Title:
Optional Image URL:

Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

[Home]