Re: Re: Re: Re: Need help starting

Posted by Scott on April 25, 2002 at 08:18:58 from (149.152.125.33):

In Reply to: Re: Re: Re: Need help starting posted by Mark A on April 24, 2002 at 09:44:02:

Is the coil getting power while the engine is cranking? One side of ignition switch contacts could be worn. one other way to know for sure is to put 12v yo coil+ and crank over. If it starts, it is probably a faulty switch.

A friend of mine has a 83 F150 with a duraspark III ignition. toatally different. Is your timing adjustable at the distributor housing? if not, you have this odd ball ignition. Your problem is probalby a bad EEC relay. I doubt this style setup was used on big blocks though.

Follow Ups:

• Re: Re: Re: Re: Re: Need help starting Mark A 10:48:51 04/25/02 (3)
  • Re: Re: Re: Re: Re: Re: Need help starting Watkins52 05:20:06 07/26/05 (0)
  • Re: Re: Re: Re: Re: Re: Need help starting Scott 06:40:43 04/29/02 (1)
    • Re: Re: Re: Re: Re: Re: Re: Need help starting Mike 15:19:34 05/03/02 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Re: Re: Need help starting Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.