'34/'35 International steering box rebuild

Posted by Stan Weber on March 28, 2005 at 08:03:23 from (139.55.153.3):

Hi-

I'm rebuilding a steering box from (I believe) a '34 or '34 International 1-ton, to use in an International-bodied hot rod project.

Does anyone have - or can anyone direct me to - an assembly drawing (exploded view, etc.) that I could use as a guide for reassembly? I'm especially interested in clearances, tolerances, etc.

Also, I'd like to replace the old-style ball bearing assemblies with modern bearings. Does anyone have experience doing this - or info about the best way to do it (what bearings to use, etc.).

I will be happy to provide photos of my disassembled unit if that will help.

Thanks in advance for any help.

Follow Ups:

• Re: '34/'35 International steering box rebuild terry 14:48:53 01/10/07 (0)
• Re: '34/'35 International steering box rebuild Chuck 21:19:44 04/20/06 (0)
• Re: '34/'35 International steering box rebuild DJ 05:12:53 03/29/05 (0)
• Re: '34/'35 International steering box rebuild benmaples 20:04:35 03/28/05 (0)

Post A Followup Name: E-Mail: Subject: Re: '34/'35 International steering box rebuild Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.