Re: trim removal(1979 F100)

[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]

Posted by John McPherson on April 19, 2005 at 07:32:44 from (216.251.170.217):

In Reply to: trim removal(1979 F100) posted by Jak on April 18, 2005 at 12:56:28:

There is/was a special tool made for taking the trim off of the mounts, but those things change over time, and may not be available.

If behind the trim can be accessed, those pieces can be popped out of the their holes. Usually the ones on the ends had a nut on them when they were accessible, otherwise they had a sleeve that poppoed into the hole first, then the mount slipped in and locked the whole combination into place.

I know Snap on made a tool for this and Owatanna did too as OTC or MATCO

Follow Ups:

Post A Followup

Name:
E-Mail:
Subject: Re: Re: trim removal(1979 F100)
Comments:

Optional Link URL:
Link Title:
Optional Image URL:

Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

[Home]