Re: Re: Re: 62 Chevy C10 - Stuck in 2nd Gear - Hel

[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]

Posted by DJ on May 19, 2005 at 23:17:49 from (63.18.62.136):

In Reply to: Re: Re: 62 Chevy C10 - Stuck in 2nd Gear - Help!!! posted by Mark on May 19, 2005 at 18:48:46:

Mark

Disconnect the linkages on the end with the adjustments (usually trans end). Put tranny arms in nutral position.

There is a hole in the column tube on both sides of the opening and in the shift levers, use a 3/16-7/32 pin to hold these aligned (use the biggest pin possible).

Some might use a bolt to pinch the linkage rod leave these in and just tighten after aligning.

Most have pinned on ends that thread on the linkage rod, adjust these so they fit in without forcing or moving anything. Replace pins in shift arms and reinstall clips.

Hope that makes sense.

Follow Ups:

Post A Followup

Name:
E-Mail:
Subject: Re: Re: Re: Re: 62 Chevy C10 - Stuck in 2nd Gear - Hel
Comments:

Optional Link URL:
Link Title:
Optional Image URL:

Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

[Home]