Re: 69 GMC 100 Kingpin and bushings need advice

[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]

Posted by dan WC ne wyo on August 06, 2005 at 17:28:03 from (69.144.239.170):

In Reply to: 69 GMC 100 Kingpin and bushings need advice posted by tom on August 04, 2005 at 09:15:16:

Hi Tom, I think that all of the 55 to59 Chevys and GMC 1/2 tons used a floating bushing in the spindle. The 3/4 ton and 1 ton models used pressed in bushings. If the outside of the bushing has a groove around it in line with the grease hole it is a floating bushing the grease can get to the pin with the bushing in any position. HTH good luck dan wc ne wyo

Follow Ups:

Post A Followup

Name:
E-Mail:
Subject: Re: Re: 69 GMC 100 Kingpin and bushings need advice
Comments:

Optional Link URL:
Link Title:
Optional Image URL:

Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

[Home]