Re: drive shaft angle 77 F100 custom

[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]

Posted by db on September 06, 2005 at 02:38:26 from (152.163.100.199):

In Reply to: drive shaft angle 77 F100 custom posted by c loveridge on September 05, 2005 at 03:39:05:

You'll probably have to tip the axle housing up in front to reduce the angles. If you have leaf springs you can grind the welds off the blocks on the axle housing that position the axle housing, rotate the axle housing to the desired position, and weld them back on. Lighter duty axle housings are softer steel, and heavier duty housings are harder steel. That will affect your choice of cutting or grinding tools and welding rod.

Follow Ups:

Post A Followup

Name:
E-Mail:
Subject: Re: Re: drive shaft angle 77 F100 custom
Comments:

Optional Link URL:
Link Title:
Optional Image URL:

Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

[Home]