Classic Truck Discussion Board|
'55 F-600 6Vto12V Revisited again
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Michael Sheik on December 08, 2006 at 08:09:32 from (22.214.171.124):
Well after trying to chase wiring on the back of the instrument cluster by contorting myself and using flashlight and mirror, I have determined that it is darned impossible to see let alone work on wiring in the CVR that Jon talked about down the page.
I am going to take the instrument cluster out of its hole. I see a phillips head screw on both left and right sides and removing these is necessary. Looks like the cluster pushes forward toward the firewall and will not come out toward the steering column initially anyway. I want to get it out to where I can see and work on the wiring. Do you first push it forward toward firewall and then twist or turn some way until it will come out opening? Somebody out there has to have pulled this thing out!!!!
Copyright © 2002-2013 YesterdaysTruck.com
Antique Truck Headquarters