Re: '55 F600 6V-12V Conv. Making headway

[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]

Posted by Jon Hagen on December 10, 2006 at 14:31:37 from (69.26.29.84):

In Reply to: '55 F600 6V-12V Conv. Making headway posted by Michael Sheik on December 10, 2006 at 13:53:54:

Sounds good on the gauge power. You have the case/mounting lug of the CVR connected to a good ground ? It must be grounded to work correctly.

The amp gauge only reads amps entering or leaving the battery,it does not care if the current is 6 or 12 volts. leave it as it is. The amp gauge must NOT be connected through the CVR. Sounds like your doing fine with your 12V conversion,good luck and keep us informed of your progress.

Follow Ups:

Re: Re: '55 F600 6V-12V Conv. Making headway Michael Sheik 04:47:30 12/11/06 (0)

Post A Followup

Name:
E-Mail:
Subject: Re: Re: '55 F600 6V-12V Conv. Making headway
Comments:

Optional Link URL:
Link Title:
Optional Image URL:

Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

[Home]