Re: Re: Re: carburetor for a 1979 f600, with 370-

[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]

Posted by Bob on March 05, 2007 at 09:19:17 from (69.178.229.154):

In Reply to: Re: Re: carburetor for a 1979 f600, with 370-2v t posted by HILFER on March 05, 2007 at 08:40:32:

That basic carburetor was used from the 50's into the 80's so a float bowl shouldn't be to tough to find. Be sure to check the size of the threads where the gas inlet fitting screws in and match them up to your old bowl as there's at least 2 sizes there.

They made the bowls in "center-hung" or "side-hung" float styles. They will interchange on the carburetor but the location of the gasoline inlet wll be different to match up to the gas line.

Also be sure the threads are good in the 4 holes underneath the float bowl that attach the accelerator pump to the float bowl.

Follow Ups:

Post A Followup

Name:
E-Mail:
Subject: Re: Re: Re: Re: carburetor for a 1979 f600, with 370-
Comments:

Optional Link URL:
Link Title:
Optional Image URL:

Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

[Home]