Re: 1963 chevy C10

[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]

Posted by John A. on March 21, 2007 at 22:02:47 from (65.150.79.66):

In Reply to: 1963 chevy C10 posted by John Brock on March 21, 2007 at 06:28:30:

John, I belive what you need is a 71/72 donor truck, don't hold me to the 71 But I know the 72 has a 5 lug set up. So the rearend should just bolt right up. Again the Frontend has a disk setup from the factory The complete upper,lower,spindle should bolt right up to the existing holes in the frame. Or just swap out the spindle porition and you are good to go. Then just setup the booster/masterscylinder, divider ad away you go! Good luck.
Later,
John A.

Follow Ups:

Post A Followup

Name:
E-Mail:
Subject: Re: Re: 1963 chevy C10
Comments:

Optional Link URL:
Link Title:
Optional Image URL:

Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

[Home]