Re: Ford 360 and 390

[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]

Posted by Jim on March 05, 2002 at 08:57:53 from (208.182.75.4):

In Reply to: Ford 360 and 390 posted by William on March 04, 2002 at 20:12:22:

hey,
WE just rebuilt our 360 which was in a one ton ford truck. We found that here is no wat to tell the difference externally. The block is the same, as are the heads. The crank is the only diference. The stroke is just a little bit longer for a 390. Just a useful bit of info.

The block used for 360, and 390 are the same as the blocks use for 330,360,361,390,391,428,429.
The only difference was ,crank,heads,cam,rods.
I always figured this was because ford was cheap, and didnt want to make another casting.

I'm fairly sure that this info is correct. If you find out differently please write me back.

Thanks,
Jimmy

Follow Ups:

Re: Re: Ford 360 and 390 Brian G. NY 11:41:15 03/05/02 (0)
Re: Re: Ford 360 and 390 the tractor vet 11:16:40 03/05/02 (1)
- Re: Re: Re: Ford 360 and 390 Dave (NE) 13:59:31 03/05/02 (0)

Post A Followup

Name:
E-Mail:
Subject: Re: Re: Ford 360 and 390
Comments:

Optional Link URL:
Link Title:
Optional Image URL:

Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

[Home]