Re: Re: Re: Ford 360 and 390

[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]

Posted by Dave (NE) on March 05, 2002 at 13:59:31 from (162.40.118.2):

In Reply to: Re: Re: Ford 360 and 390 posted by the tractor vet on March 05, 2002 at 11:16:40:

Externally, its tough. If you can see the back flange of the crank, the 390 has a square notch and maybe a half-moon cutout. the 360 has just the half-moon. you can also check the strok by dropping a 18" length of wire down the spark plug hole and rolling the engine over by hand. 3.50 stroke is a 360, 3.78 stroke is a 390. The 352 is cast in all FE blocks since they were all based on the 352 and use the same block.
Dave

Follow Ups:

Post A Followup

Name:
E-Mail:
Subject: Re: Re: Re: Re: Ford 360 and 390
Comments:

Optional Link URL:
Link Title:
Optional Image URL:

Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

[Home]