77 GMC Jimmy w/350 Edelbrock Carb/Intake

[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]

Posted by Evan on June 13, 2007 at 21:54:36 from (154.11.98.45):

Body of Message:

I ripped apart my 350 in order to replace all the pushrods because a few had snapped right apart. Before this it ran rough because the timing was off. After i put it all together with all new gaskets, even for the distributor, all i get now is either a huge backfire, which led me to believe the timing was out half a cycle, so i switched it, and now it sounds like it wants to start, but it either backfires much quieter, or it spits gas out the carb. Any help would be much appreciated because i am stumped. PS, i made sure all my rocker arms were torqued correctly.

Follow Ups:

Re: 77 GMC Jimmy w/350 Edelbrock Carb/Intake Joe(TX) 12:16:47 06/17/07 (0)
Re: 77 GMC Jimmy w/350 Edelbrock Carb/Intake Bob 23:32:25 06/13/07 (2)
- Re: Re: 77 GMC Jimmy w/350 Edelbrock Carb/Intake sd pete 06:00:09 06/14/07 (1)
  - Re: Re: Re: 77 GMC Jimmy w/350 Edelbrock Carb/Inta db 12:13:52 06/14/07 (0)

Post A Followup

Name:
E-Mail:
Subject: Re: 77 GMC Jimmy w/350 Edelbrock Carb/Intake
Comments:

Optional Link URL:
Link Title:
Optional Image URL:

Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

[Home]