Re: Re: Re: 68 C-10 - inline 6 w/ 3-on-tree - seve

[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]

Posted by db on July 23, 2007 at 09:28:01 from (64.12.116.206):

In Reply to: Re: Re: 68 C-10 - inline 6 w/ 3-on-tree - several posted by Gord on July 22, 2007 at 23:09:23:

The selector is not supposed to slip up between the 1 r and the 2 3. They might be bent or worn so they are separated. Maybe they will bend a little to come together. There should be a hole, maybe 1/8 inch in each one that you put a pin through to align them, then use the adjustments on the linkage to align the holes until you can get the pin through

Follow Ups:

Post A Followup

Name:
E-Mail:
Subject: Re: Re: Re: Re: 68 C-10 - inline 6 w/ 3-on-tree - seve
Comments:

Optional Link URL:
Link Title:
Optional Image URL:

Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

[Home]