Re: 1988 7.3 Ford

[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]

Posted by Geno-Wy on September 17, 2007 at 08:34:29 from (209.193.81.203):

In Reply to: 1988 7.3 Ford posted by Justin on September 16, 2007 at 21:06:26:

Depress shrader valve on filter housing while someone is cranking over engine til you have good fuel flow. Also need to loosen lines at injectors about one turn, then crank over til you see fuel seeping out. this should get most of the air out of system. now tighten lines cycle glow plugs hold thottle to floor and should start. if it won't while cranking and glow plugs done cycling, a very small wisp of starting fluid. I hate using the stuff and use it very sparingly. Good luck.

Follow Ups:

Re: Re: 1988 7.3 Ford Ryan for South Dakota 23:56:23 09/20/07 (0)
Re: Re: 1988 7.3 Ford Justin 07:34:33 09/18/07 (0)

Post A Followup

Name:
E-Mail:
Subject: Re: Re: 1988 7.3 Ford
Comments:

Optional Link URL:
Link Title:
Optional Image URL:

Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

[Home]