Re: Re: 1986 366 cu. in. gasoline octane

[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]

Posted by Jon Hagen on September 17, 2007 at 11:25:26 from (12.175.230.36):

In Reply to: Re: 1986 366 cu. in. gasoline octane posted by Buck in WV on September 17, 2007 at 07:08:06:

The 366 was only used as a medium truck engine and is quite low compression, I seem to remember it being little if any above 8/1, so I suspect it will work fine on the cheapest 87 octane gas.
Listen for any detonation when you lug it down and back of the timing only if you must.

I still use an 87 C60 with a 366 and I think the operators manual is still in the glove box. If the fuel requirements in the manual are anything but what I stated, I will post them here.

Follow Ups:

Post A Followup

Name:
E-Mail:
Subject: Re: Re: Re: 1986 366 cu. in. gasoline octane
Comments:

Optional Link URL:
Link Title:
Optional Image URL:

Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

[Home]