Re: Ford 292 misfire

Posted by sparepartsTN on July 30, 2009 at 14:52:28 from (68.154.161.191):

In Reply to: Ford 292 misfire posted by Brooke on July 29, 2009 at 16:31:12:

According to Motors Truck Repair Manual, Ford Standard Trucks: 1960 Ford 292: Plugs BTF-6, Plug gap .030, Point gap .015, Timing mark 6 degrees BTDC, Valve seat angle 45 degrees, Valve clearance .019 hot intake and exhaust, Valve spring installed height 1 25/32.
Distributor Specs.: Cam angle degrees 26-28, Breaker arm spring tension 17-20, Centrifugal advance degrees @ RPM of distributor Advance starts 1@700 Full advance 10@1800,(two barrel carb.)
Don"t know if any of this will help, hope so, if I can provide anymore information for you just let me know. Good luck, Warren

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Return to Post