351 m - 400 Ford engines

[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]

Posted by Joel H. on October 27, 2002 at 14:57:17 from (209.163.0.135):

What is the difference in the heads between a 351m and a 400? I have a 78 Ford F150 4x4 with a 351m. I bought a 400 long block that I want to put in this winter. Are there going to be any problems with this switch over? Is the intake, exhaust manifolds, flywheel and harmonic balancer going to fit off the 351 onto the 400? The 400 has the sump in the pan in the front, my pan has the sump in the pan in the back. Will this just need for me to switch the pick up tube for the oil pump? Any advice would be appreciated before I start this project. Thanks.

Follow Ups:

Re: 351 m - 400 Ford engines ronnie 21:17:05 10/12/05 (0)
Re: 351 m - 400 Ford engines Uriah 18:02:15 11/05/02 (0)
Re: 351 m - 400 Ford engines Allan 20:18:24 11/03/02 (0)
Re: 351 m - 400 Ford engines RWP 18:04:48 10/27/02 (0)
Re: 351 m - 400 Ford engines REMMo 15:46:04 10/27/02 (4)
- Re: Re: 351 m - 400 Ford engines Danielle Zelenko 15:19:34 04/10/06 (0)
- Re: Re: 351 m - 400 Ford engines Justin 17:28:30 12/08/02 (0)
- Re: Re: 351 m - 400 Ford engines the tractor vet 16:12:38 10/27/02 (1)
  - Re: Re: Re: 351 m - 400 Ford engines A.J. 08:09:50 12/10/02 (0)

Post A Followup

Name:
E-Mail:
Subject: Re: 351 m - 400 Ford engines
Comments:

Optional Link URL:
Link Title:
Optional Image URL:

Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

[Home]