Re: 671 Detroit Clutch problem

Posted by michael a. lee on October 18, 2009 at 08:11:15 from (64.33.255.26):

In Reply to: 671 Detroit Clutch problem posted by John T on September 28, 2009 at 13:35:28:

with all problems you must start at the beginning. make sure all the linkage to the clutch is in good condition. you are only moving the fingers 1/4 inch, might not be enough. a worn pin and clevis or worn bushings can reduce travel. if it utilizes a cable it could be stetched. it is not a 671 detroit clutch. it is either a single disk push type clutch, a double disk pull type clutch. with the double disk which i doubt it is you also have drive lugs that need to be aligned. generally new pressure plates do not need the fingers adjusted.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Return to Post