|Home | Gallery | Forum | Ads||YESTERDAYSTRUCK.COM|
|The Classic Truck Resource Page|
Vintage Truck Headquarters
Re: Wisconsin T head engine
Posted by Longknife on January 05, 2015 at 09:42:02 from (184.108.40.206):
In Reply to: Wisconsin T head engine posted by Chief 83 on January 04, 2015 at 14:56:40:
Any internal combustion engine is designed to fire at TDC. (+ or -). Most engines are timed on #1 cly. but some are not. You will have to determine which cylinder it is supposed to be timed on. Here is how to set it for #1 cyl....Rotate engine till #1 intake valve opens and closes, verify that the piston is now on TDC, verify that BOTH valves are fully closed. Now install timing gear so distributor rotor points to cap tower of #1 CYL. After installing gear rotate engine TWO complete revolutions and re-check that piston is TDC, valves are CLOSED and rotor is pointing to #1 cyl... re-assemble and set timing according to specs.....
Copyright © 2002-2013 YesterdaysTruck.com