Re: Re: Re: Ford F150 swap from 302 to 351 M-400

[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]

Posted by Jon Hagen on January 04, 2003 at 17:38:46 from (63.160.195.101):

In Reply to: Re: Re: Ford F150 swap from 302 to 351 M-400 posted by Farmall Man on January 04, 2003 at 09:54:15:

I must disagree a bit with Farmal Man's opinion of the 351W. It has the exact same 4inch bore and 3-1/2 stroke of the 35`M and will produce good low end torque with the right heads and cam.It Has a much better oiling system than the 351M-400 as it has a dedicated oil gallery for the crank oiling instead of tapping into a lifter gallery like a 351M-400, and has less bearing trouble. The 351W was the standard mid size engine for Ford pickups and vans during the time after the 351M-400 and before the new modular motors. In fact it was still used in vans untill the last few years

Follow Ups:

Post A Followup

Name:
E-Mail:
Subject: Re: Re: Re: Re: Ford F150 swap from 302 to 351 M-400
Comments:

Optional Link URL:
Link Title:
Optional Image URL:

Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

[Home]