Carb to Hood clearance problem

[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]

Posted by Rick on April 20, 2003 at 22:57:44 from (198.25.50.2):

I have a 68 camaro with a 454 and an edelbrock performer 2 intake with a edelbrock 1901 carb on top. Problem is that there is only about 1/2" clearance from the top of the carb to the hood. I don't have a cowl hood and am overseas so getting a replacement is bascially impossible. Is there any "low profile" air cleaner assembly that will if in 1/2"? I can't cut a hole in teh hood because I won't pass a road inspection. No fun if I can't drive it.

Thanks
Rick

Follow Ups:

Re: Carb to Hood clearance problem John Ne. 23:49:38 04/22/03 (1)
- Re: Re: Carb to Hood clearance problem Rick 15:02:03 04/23/03 (0)
Re: Carb to Hood clearance problem Hal/WA 22:55:43 04/21/03 (1)
- Re: Re: Carb to Hood clearance problem ZZ 05:40:24 04/22/03 (0)

Post A Followup

Name:
E-Mail:
Subject: Re: Carb to Hood clearance problem
Comments:

Optional Link URL:
Link Title:
Optional Image URL:

Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

[Home]