Re: Re: 1987 s15 Jimmy info needed

[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]

Posted by Gary-Miss on April 25, 2003 at 21:53:32 from (64.12.96.79):

In Reply to: Re: 1987 s15 Jimmy info needed posted by Ludwig on April 25, 2003 at 09:18:55:

The flywheel housing bolt pattern isdifferent on the 2.8 liter than the 305. Aman I know, however, replaced his 2.8 with a 350 with a turbo 350. It worked out well. One tip when you are fooling with these S-10 aND s-15 as well as the blazers and Gimmys. Pull the left cab mount bolts and the left radiator support bolt, jack the left side of the body up and stick a 4X4 on top of the frame when doing any enginechanges or transmission changes. It takes ten minutes with animpact wrench and saves ton of time and knuckle busting.

Follow Ups:

Post A Followup

Name:
E-Mail:
Subject: Re: Re: Re: 1987 s15 Jimmy info needed
Comments:

Optional Link URL:
Link Title:
Optional Image URL:

Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

[Home]