Re: Re: '72 Chevy C-20 rear axle

[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]

Posted by Gary-Miss on April 27, 2003 at 21:28:19 from (64.12.96.79):

In Reply to: Re: '72 Chevy C-20 rear axle posted by andy in Ohio on April 27, 2003 at 20:51:08:

I've got a "chunk" out of a 72 3/4 ton, but, it's a 4.56 ratio, not exactly what you would want for highway running unless you had an overdrive. You can put any kind of rear end in it you want. It just takes some work to adapt the trailing arms. One word of caution if you do thi. Do not weld anything until you are finished. Then, set it down on the tires and check the pinion angle, tap the nose to the right angle, then tack it. 1/8 of an inch makes a BIG difference in the angle. Been there.

Follow Ups:

Re: Re: Re: '72 Chevy C-20 rear axle fast68chevy 05:35:04 01/14/06 (0)

Post A Followup

Name:
E-Mail:
Subject: Re: Re: Re: '72 Chevy C-20 rear axle
Comments:

Optional Link URL:
Link Title:
Optional Image URL:

Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

[Home]