1200C hard to change starter

[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]

Posted by Evan350 on March 31, 2002 at 15:32:29 from (24.169.133.192):

I'm with a museum that has an International 1200C 4x4 with a straight 6 and the starter motor died. It took us over an hour to get the darn starter removed. The upper bolt is well protected from being reached by any kind of ordinary socket, box wrench or pliers. One of the guys eventually broke the end off his 3/4" box wrench so it was only 3" long--that fit in there and the bolt came right out. How do you tackle hard to reach bolts like this?

Follow Ups:

Re: 1200C hard to change starter John Ne. 21:38:18 03/31/02 (0)
Re: 1200C hard to change starter Trader 18:44:46 03/31/02 (0)
Re: 1200C hard to change starter ferrell freeman 15:47:00 03/31/02 (0)

Post A Followup

Name:
E-Mail:
Subject: Re: 1200C hard to change starter
Comments:

Optional Link URL:
Link Title:
Optional Image URL:

Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

[Home]