360 Dodge Problem

[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]

Posted by TBrake on October 22, 2003 at 07:50:47 from (151.121.225.1):

I'm working on a 74 W200 Dodge with a 360. It has a 2v carb and is stock except for and very mild Edelbrock cam and timing gears. I have a miss that I can not get rid of. It is not a "dead" miss. By that I mean it will run OK for a second then miss, then run OK. It does it through out the RPM range.
I have worked on engines a long time but this one has me stumped. It has good compression (120 lbs.) rebuilt heads, rebuilt carb, all new ignition parts. I have searched for a vacume leak high and low, none found. Although at an idle it only has 10in/mg of vacume. I have tried everything I know to do. So any ideas?

Follow Ups:

Re: 360 Dodge Problem e 21:43:16 11/21/03 (0)
Re: 360 Dodge Problem dodgeboy 15:11:26 10/26/03 (0)
Re: 360 Dodge Problem Dave S. 17:02:57 10/23/03 (2)
- Re: Re: 360 Dodge Problem TBrake 06:50:24 10/24/03 (1)
  - Re: Re: Re: 360 Dodge Problem Dave S. 13:59:33 10/24/03 (0)
Re: 360 Dodge Problem Jack 08:51:14 10/23/03 (1)
- Re: Re: 360 Dodge Problem TBrake 11:15:15 10/23/03 (0)
Re: 360 Dodge Problem r_d97 17:19:01 10/22/03 (1)
- Re: Re: 360 Dodge Problem TBrake 06:51:25 10/23/03 (0)
Re: 360 Dodge Problem RB/CT 16:57:53 10/22/03 (1)
- Re: Re: 360 Dodge Problem TBrake 09:37:38 10/23/03 (0)
Re: 360 Dodge Problem Duner Wi 11:49:02 10/22/03 (2)
- Re: Re: 360 Dodge Problem TBrake 12:35:56 10/22/03 (1)
  - Re: Re: Re: 360 Dodge Problem Duner Wi 17:50:55 10/22/03 (0)

Post A Followup

Name:
E-Mail:
Subject: Re: 360 Dodge Problem
Comments:

Optional Link URL:
Link Title:
Optional Image URL:

Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

[Home]