Re: 1971 402chevy/gmc oneton truck

[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]

Posted by Gary-Miss on December 05, 2003 at 18:58:50 from (152.163.252.163):

In Reply to: 1971 402chevy/gmc oneton truck posted by brian on December 05, 2003 at 12:48:23:

From your description (three bolt) I would assume this is a four speed one ton with a standard clutch assembnly, not the 13 inch clutch the big trucks have that required an adaptor plat on the back of the block. If so, just ask the parts house for a starter for a 71 350 straight shift.If all else fails and you need a rebuilt starter, get one for the big block automatic (high torque that will require the copper extension from the solenoid to the starter), put a new bushing in the drive end of your old starter and make a quick swap of the ends.

Follow Ups:

Re: Re: 1971 402chevy/gmc oneton truck Difficult time 13:38:16 01/07/04 (0)

Post A Followup

Name:
E-Mail:
Subject: Re: Re: 1971 402chevy/gmc oneton truck
Comments:

Optional Link URL:
Link Title:
Optional Image URL:

Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

[Home]