Re: transmission temp sender location

[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]

Posted by Fred Kobs on January 02, 2004 at 20:50:44 from (207.177.45.38):

In Reply to: transmission temp sender location posted by Ken C. on December 28, 2003 at 19:28:35:

you HAVE to be careful what you put back into a dodge trans these days. for years they have required a friction modifier or dexIII+3 or dodge's own special fluid. the newest ones take an additive only dodge has i think. while you have the pan off, I reccomend you also braze in a drain plug to make future service as easy as possible. I always ues a 3/8" flange nut and a bolt with a copper brake hose washer under the bolt head for positive seal. just my 2cents Fred

Follow Ups:

Post A Followup

Name:
E-Mail:
Subject: Re: Re: transmission temp sender location
Comments:

Optional Link URL:
Link Title:
Optional Image URL:

Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

[Home]