Tranny won't come out!

Posted by b_met on January 30, 2004 at 09:01:28 from (198.26.120.13):

I have a 65 C10 Stepside with a 283 and a 3 on the tree setup. I'm trying to pull the tranny to replace, but it won't come out. I have removed all bolts I can find from the block( 6 of them). The shifting and clutch linkage has been removed too. I'm 99% sure the thing is in neutral. It starts to separate at the bottom, but at the top behind the distributor is still sealed tight. I've tried to jack it up and let off, shaking, banging it, and ratchet strapping it from the frame in the back. What could be the hang up?

Sorry for long post, but I just wanted to give the whole situation.

Follow Ups:

• Re: Tranny won't come out! John- Yep 7 07:20:47 02/02/04 (0)
• Re: Tranny won't come out! Mike 18:26:00 01/30/04 (1)
  • Re: Re: Tranny won't come out! Hal/WA 19:17:34 02/04/04 (0)
• Re: Tranny won't come out! Roy 12:54:59 01/30/04 (2)
  • Re: Re: Tranny won't come out! Dan NM 16:33:17 01/30/04 (1)
    • Re: Re: Re: Tranny won't come out! Allan C 09:00:15 01/31/04 (0)

Post A Followup Name: E-Mail: Subject: Re: Tranny won't come out! Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.