Re: Re: Re: Changing Trans

[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]

Posted by Dan / NM on March 30, 2004 at 22:00:37 from (65.58.138.24):

In Reply to: Re: Re: Changing Trans posted by Bob on March 30, 2004 at 20:24:18:

"The 700-R4 needs no electronic control. All it needs is a manifold vacuum switch fed power from a brake switch to provide power to a pressure switch in the tranny that allows lockup when the tranny is in 3rd or 4th (or 4TH only, if desired), and the engine load is low enough to allow lockup, and your foot is off the brake"
------------------------------------
You can also use a diesel valvebody and eliminate the need for any external wiring.

Follow Ups:

Re: Re: Re: Re: Changing Trans Bob 06:16:33 03/31/04 (0)

Post A Followup

Name:
E-Mail:
Subject: Re: Re: Re: Re: Changing Trans
Comments:

Optional Link URL:
Link Title:
Optional Image URL:

Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

[Home]